If you’ve noticed a white, chalky substance accumulating inside your geyser or water heater, you might be wondering what it is and how to get rid of it.
This build-up is usually caused by mineral deposits, primarily calcium carbonate, which is commonly found in hard water.
Over time, this mineral accumulation can reduce your geyser’s efficiency and even cause damage if not cleaned properly.
Here’s what you need to know and how to clean it effectively.
What Is the White Substance?
The white chalky material you see in your geyser is mineral sediment, primarily calcium and magnesium, that settles at the bottom of the tank. This happens when hard water heats up, causing these minerals to separate from the water and form a solid layer over time. If left untreated, it can clog pipes, reduce water flow, and even damage the heating element.
How to Clean the Geyser
Turn off the geyser: Before you start, ensure the power is switched off (for electric geysers) or turn off the gas supply (for gas geysers).
Drain the geyser: Connect a hose to the drain valve at the bottom of the geyser and direct the water into a bucket or outside drain. Open the valve and let the water flow out, removing sediment along with it.
Flush with vinegar: To break down the stubborn mineral deposits, pour a solution of water and white vinegar into the tank. Let it sit for a few hours, then flush it out by filling the tank with fresh water.
Rinse and refill: Once the deposits are cleared, close the valve, remove the hose, and refill the tank with fresh water. Don’t forget to turn the geyser back on once it’s full.
Prevention Tips:
- Regular Maintenance: Perform this cleaning process every 6 to 12 months to prevent excessive build-up.
- Water Softeners: Installing a water softener can help reduce the mineral content in your water, preventing future deposits.
Read Also:
BSNL Launches New Affordable Recharge Plan with 52 Days Validity, Unlimited Calls and Data
Google Pixel 9a to Launch at Affordable Price with Impressive Features
